Skip to content
Commercial stucco & EIFS contractor serving Alpharetta, GA Offices • Retail • Condos • Multifamily • Restaurants Call (770) 758-8417
Advanced Stucco Repair AlpharettaCommercial Stucco & EIFS (770) 758-8417
  1. Home
  2. Services
  3. EIFS Installation
EIFS installation • Alpharetta, GA

Commercial EIFS Installation in Alpharetta

For new buildings, additions and re-clads around Alpharetta, we install drainable EIFS with the weather barrier, flashing and terminations built to the manufacturer’s specification. The details behind the foam are what keep the wall dry for decades.

  • Drainable EIFS systems
  • New buildings & additions
  • Facade re-clads
  • Foam cornices & profiles
1999Georgia EIFS work
DrainableSystems built to drain
WrittenItemized quotes

Request a commercial quote

Alpharetta commercial stucco & EIFS. Property managers, boards, owners & builders.

Thank you. Your request is in, and an Advanced Stucco Repair commercial estimator will contact you shortly. If it is urgent, call (770) 758-8417.

We never share your information. Prefer to talk? Call (770) 758-8417.

Built to drain

The wall behind the foam decides how EIFS performs

EIFS is still a practical cladding for Alpharetta commercial projects: it adds continuous insulation, it is light enough for additions and re-clads over existing walls, and it can be shaped into the cornices, bands and reveals that architects use to give a building character. The systems that failed on older buildings did so because water had no way out. Drainable EIFS answers that with a weather-resistive barrier on the sheathing and a drainage path behind the insulation board.

We install to the manufacturer’s published details. That means a continuous barrier lapped correctly at every opening, flashing at window heads and sills, backwrapped or properly terminated edges, starter tracks that let water drain at the base and at floor lines, expansion joints where the structure moves, and sealant joints sized and primed so they last.

On re-clads of existing Alpharetta office and retail buildings, the work starts with the existing wall: removing failed cladding, repairing or replacing sheathing, and correcting window and roof-to-wall flashing before the new system goes on. On new construction we coordinate with the general contractor and the other envelope trades so the sequence supports the details.

Insulation board and base coat being installed on an EIFS wall
1999installing Georgia EIFS
What goes into the wall

Every layer of a commercial EIFS facade

Each layer has a job. Skip one and the facade leaks, cracks at the openings or fails at its edges.

Weather-resistive barrier

A liquid-applied or sheet barrier over the sheathing, lapped into window, storefront and roof flashing, is the facade’s real waterproofing.

The layer that keeps it dry

Drainage & adhesive

Insulation board is set in vertical ribbons of adhesive so water behind the foam drains down and out at the base of the wall.

A path out for water

Insulation board

Foam board fitted tight, staggered at corners, rasped flat and kept clear of grade, sidewalks and paving.

Continuous insulation

Mesh & base coat

Reinforcing mesh fully embedded in the base coat, with diagonal patches at openings and heavier impact mesh at entrances and ground-floor walls.

Strength where traffic hits

Sealant joints & terminations

Expansion joints at floor lines and sealant with backer rod where EIFS meets windows, storefronts, copings and other cladding.

Joints planned, not added

Cornices, bands & profiles

Foam cornices, banding, window surrounds and parapet caps shaped and coated as part of the same system, with sloped tops.

Architectural detail
Which cladding?

Choosing EIFS or hard coat stucco

Both can deliver the same look, but they are built differently. Drainable EIFS is lighter, adds continuous insulation outside the framing and makes cornices, bands and architectural shapes easy to form in foam. Hard coat stucco is harder at the surface and stands up better to carts, bikes and vehicles at ground level. Many commercial buildings use both: hard coat or impact-reinforced EIFS at the base and standard EIFS above.

We walk owners, architects and general contractors through the trade-offs, including how the wall meets windows, storefronts, roofs and other cladding such as fiber cement. If three-coat stucco is the better fit for part of the building, we install that too.

Drainable EIFS vs. three-coat stucco
FactorDrainable EIFSThree-coat stucco
InsulationContinuous foam boardNone built in
WeightOn the structureLightHeavy
Impact resistanceGround floorSofter; impact mesh helpsHard surface
Cornices & shapesEasy in foamFormed or added
DrainageWRB and drainage pathWRB, lath and weep screed
Our process

How a commercial EIFS installation comes together

Schedules depend on wall area, access, weather and cure time between coats. We set the sequence with you or your general contractor before mobilizing.

Review & sequence

We review drawings and the specified system, flag flashing and joint details that need answers, and sequence our work with the window, storefront and roofing trades.

  • Details reviewed early
  • Trade sequencing set
  • Access planned by elevation

Barrier, flashing & board

We check the sheathing, apply the weather-resistive barrier, flash openings and roof lines, then set insulation board in drainable adhesive and rasp it flat.

  • Sheathing checked first
  • Kick-outs at roof lines
  • Foam kept above grade

Base, finish & seal

Mesh is embedded in the base coat, the finish goes on in continuous sections, and sealant joints are installed at every termination.

  • Openings reinforced
  • Finish without lap lines
  • Sealant with backer rod

Bidding a project or planning a re-clad?

Bring us in before the walls are closed up. Flashing, joint and window details are easiest and cheapest to get right on paper.

Request a commercial quote
EIFS installation in Alpharetta

Re-clads and additions across Alpharetta

Much of the EIFS work in Alpharetta today is giving older buildings a new skin, or extending them with additions that have to match.

Owners repositioning dated office and retail buildings near Windward Parkway and North Point often choose a drainable EIFS re-clad to change the look and performance of the building at once. Additions and tenant-driven facade upgrades along the city’s retail corridors call for new EIFS that ties cleanly into existing walls. We plan both around occupied buildings and active sites.

Facade re-clads

Failed or dated cladding replaced with drainable EIFS over corrected substrate.

Additions

New EIFS tied into existing walls with correct flashing and transitions.

Architectural shapes

Cornices, bands and reveals built into the system to the drawings.

  • Alpharetta
  • Windward
  • North Point
  • Avalon
  • Downtown Alpharetta
  • Mansell Road
  • Milton
  • Cumming
  • Johns Creek
  • Roswell
Questions & answers

EIFS installation questions in Alpharetta

What developers, owners and general contractors ask about new EIFS on Alpharetta projects.

Does a re-clad in Alpharetta require a building permit?
Replacing cladding generally involves more review than a repair, but the specifics depend on the project. Check with the City of Alpharetta’s building department; we can provide product data and detail drawings your design team needs for submission.
Does a new facade in downtown Alpharetta need design approval?
Exterior appearance in some Alpharetta districts may be subject to design review. Check with the City of Alpharetta early, before materials and colors are locked in.
What makes EIFS drainable?
A weather-resistive barrier on the sheathing and a drainage space behind the insulation board, with flashing and starter tracks that let water exit. If water gets past the finish, it drains out instead of sitting against the sheathing.
Can EIFS go over our existing stucco or EIFS?
Sometimes, depending on the condition of the existing wall and the manufacturer’s requirements. Often the existing cladding must come off so wet sheathing and missing flashing can be corrected first.
Do you work as a subcontractor to general contractors?
Yes. We bid and install EIFS packages for general contractors and developers, and coordinate sequencing with framing, windows, roofing and sealants.

Plan your EIFS project in Alpharetta

Send drawings or describe the building. We will review the details and return a written, itemized EIFS quote.

Call now Commercial quote